3D printed new G80 system
I have moved over to the G80 system. Much easier to build. No polymer framework at all. I got a really nice build out of it. And you can buy the frame or 3D print one. I did both. Check it out. Once the FCU is done all you have to do is drop in your trigger and housing, and the Slide lock, and the slide catch. I admit it was not as fun as a polymer 80, But it sure was easier and had no problems on the range with the first 300 rounds. There are a few 3D printable frames out there, but designers are popping them out every week. There is now about 10 or so on the G80 site you can download and print.
27 Views