Print your own. There are plenty of files out there. And I ran across a couple that I would put up against a P80. The rear pocket on the P 80 is so temperamental to get right. As I was trying to place my rear rail into the rear pocket of my P 80 this is what happened. And now I can't use the frame at all, so I came across a file and had it printed and this is what it looks like. The P 80 is on the left and the printer is on the right. I had nothing but problems with the P80. The one that I had printed I spent bow three hours of meticulous sanding. When I put everything together, the slide would not even rack. After about 23 hours of racking my brain and tinkering, I found that the rails frontier had to be polished, and a little taken off the height and the width, just a whisker. Then I had to Polish my slide receiver, and now it racks!!! I hope this helps if you have any questions feel free
Print your own. There are plenty of files out there. And I ran across a couple that I would put up against a P80. The rear pocket on the P 80 is so temperamental to get right. As I was trying to place my rear rail into the rear pocket of my P 80 this is what happened. And now I can't use the frame at all, so I came across a file and had it printed and this is what it looks like. The P 80 is on the left and the printer is on the right. I had nothing but problems with the P80. The one that I had printed I spent bow three hours of meticulous sanding. When I put everything together, the slide would not even rack. After about 23 hours of racking my brain and tinkering, I found that the rails frontier had to be polished, and a little taken off the height and the width, just a whisker. Then I had to Polish my slide receiver, and now it racks!!! I hope this helps if you have any questions feel free